$ cvt 1368 676 60
# 1368x676 59.74 Hz (CVT) hsync: 42.00 kHz; pclk: 74.25 MHz
Modeline "1368x676_60.00"   74.25  1368 1432 1568 1768  676 679 689 703 -hsync +vsync

Section "Monitor"
    Identifier  "Configured Monitor"
    Modeline "1200x576"   54.50  1200 1240 1360 1520  576 579 589 599 -hsync +vsync
    Modeline "1280x614"   62.25  1280 1328 1456 1632  614 617 627 639 -hsync +vsync
    Modeline "1368x676"   74.25  1368 1432 1568 1768  676 679 689 703 -hsync +vsync
    Modeline "1600x768"   65.0 1024 1048 1184 1344 768 771 777 806 +vsync +hsync
EndSection

Section "Screen"
    Identifier  "Default Screen"
    Monitor     "Configured Monitor"
    Device      "Configured Video Device"
    DefaultDepth    24
    SubSection "Display"
        Modes   "1600x768" "1368x676" "1280x614" "1200x576"
    EndSubSection
EndSection

참고자료
• Ubuntu 9.04 on VAIO type P
• VAIO type P で ubuntu、X解像度の追加編

$ sudo apt-get install ffmpeg

Port 8090
# bind to all IPs aliased or not
BindAddress 0.0.0.0
# max number of simultaneous clients
MaxClients 1000
# max bandwidth per-client (kb/s)
MaxBandwidth 10000
# Suppress that if you want to launch ffserver as a daemon.
NoDaemon

<Feed feed1.ffm>
File /tmp/feed1.ffm
FileMaxSize 100M
</Feed>


<Stream test.swf>
Feed feed1.ffm
Format swf
VideoCodec flv
VideoFrameRate 15
VideoBufferSize 80000
VideoBitRate 100
VideoQMin 1
VideoQMax 5
VideoSize 640x480
PreRoll 0
Noaudio
</Stream>

$ ffserver -f ./ffserver.conf

$ ffmpeg -r 15 -s 640x480 -f video4linux2 -i /dev/video0 http://localhost:8090/feed1.ffm

http://스트리밍서버(VAIO P)주소:8090/test.swf

참고자료
• HOWTO video stream from webcam through internet with ffmpeg

#!/usr/bin/env bash
#
# syntax:
# 'sudo zbright +N' increments screen brightness by N percent (N=0-100)
# 'sudo zbright -N' decrements screen brightness by N percent
# 'sudo zbright N'  sets screen brightness to N percent
# 'sudo zbright'    w/o any args reports current brightness
#
# note: must be run as sudo
#
# 2008-12-24   Ryan M. Eustice   eustice@umich.edu

# probe current brightness
po=`cat /sys/class/backlight/psblvds/brightness` # percent (0-100)
#echo "$ho $do $po"

if [ $1 ]; then
    if [ "$(echo $1 | tr -d '\-')" != "$1" ]; then
        delta=$(echo $1 | tr -d '\-');
        p=$((po-delta));
    elif [ "$(echo $1 | tr -d '\+')" != "$1" ]; then
        delta=$(echo $1 | tr -d '\+');
        p=$((po+delta));
    else
        p=$1;
    fi

    if [ $p -ge 100 ]; then
        p=100;
    fi
    if [ $p -le 20 ]; then
        p=20;
    fi

    for i in /sys/class/backlight/*/brightness; do echo $p > $i; done

else
    echo "$po";
fi

$ sudo zbright +10

$ sudo zbright -10

# /etc/sudoers
#
# This file MUST be edited with the 'visudo' command as root.
#
# See the man page for details on how to write a sudoers file.
#

Defaults    env_reset

# Host alias specification

# User alias specification

# Cmnd alias specification

# User privilege specification
root    ALL=(ALL) ALL

# Uncomment to allow members of group sudo to not need a password
# (Note that later entries override this, so you might need to move
# it further down)
# %sudo ALL=NOPASSWD: ALL

# Members of the admin group may gain root privileges
%admin ALL=(ALL) ALL
%admin ALL=NOPASSWD : /usr/local/bin/zbright

<Mod4>F6

<Mod4>F5

참고자료
• Re: Problems with 9300M GS on Sony Vaio Z11 - zbright 원본 소스

deb http://ppa.launchpad.net/ubuntu-mobile/ppa/ubuntu jaunty main
deb-src http://ppa.launchpad.net/ubuntu-mobile/ppa/ubuntu jaunty main

$ sudo apt-get update
$ sudo apt-get install psb-modules xserver-xorg-video-psb

# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with "#" are ignored.

lp
psb

title        Ubuntu 9.04, kernel 2.6.28-11-generic
uuid        6131c711-bf51-4e4a-ac0a-94df0a6880ef
kernel        /boot/vmlinuz-2.6.28-11-generic root=UUID=6131c711-bf51-4e4a-ac0a-94df0a6880ef ro quiet nosplash mem=1792mb
initrd        /boot/initrd.img-2.6.28-11-generic
quiet

# Driver whitelist
WHITELIST="psb nvidia intel ati radeon i810 fglrx"

Section "Device"
    Identifier  "Configured Video Device"
    Option      "AccelMethod" "EXA"
    Option      "DRI" "on"
    Option      "MigrationHeuristic" "greedy"
EndSection

options snd-hda-intel model=sony-assamd

$ sudo alsa reload

tmpfs        /tmp        tmpfs    defaults    0    0

vm.dirty_writeback_centisecs = 1500
vm.swappiness=0

참고자료
• GMA500(dell mini12 / mini10, sony VAIO P) 2D/3D 가속하기
• Ubuntu 9.04 on VAIO type P
• HDA ATI SB / INTEL Sound card problem [SOLUTION!]

Section "InputDevice"
    Identifier  "Configured Mouse"
    Driver      "mouse"
    Option      "CorePointer"
    Option      "Device" "/dev/input/mice"
    Option      "Protocol"  "auto"
    Option      "Buttons"   "7"
    Option      "ZAxisMapping"  "4 5"
    Option      "ButtonMapping" "1 2 3 6 7"
EndSection

sudo apt-get inetsll imwheel

".*"
None, Left, Alt_L|Left
None, Right, Alt_L|Right
 
"(null)"
None, Left, Alt_L|Left
None, Right, Alt_L|Right

# Configuration file for setting imwheel startup parameters.

# Set this to "1" to have imwheel start along with your X session.
IMWHEEL_START=1

# Specify the command line parameters to pass to imwheel when it is started
# along with your X session (above). Simply uncomment the bottom line, and
# if necessary replace the default options with your own. A button spec of
# "0 0 0 0 8 9" will grab the thumb buttons of most mice, while skipping over
# the mouse wheel (both the vertical and horizontal axes, whether or not they
# exist on your mouse). Keep in mind that each button number must be separated
# by a space.
#IMWHEEL_PARAMS='-b "0 0 0 0 8 9"'

참고자료
• HOWTO: Side Buttons in Both Nautilus and Firefox
• 우분투 노틸러스에서 마우스 4,5번 버튼(엄지손가락 버튼?) 이용하기